|
Poster
Inserts Reverse Bound
All
reverse bound poster inserts must conform to the following specifications
and must be strictly adhered to.
-
The bind-in lap must be a minimum of 13mm
-
Poster to have a minimum of 4mm of bleed for all edges to be trimmed.
If the poster has a folded edge that is not be trimmed then a
minimum of 10mm must be left from the trimmed edge of the product.
- Where a multi-page
reverse bound insert has a single sheet bind-in lap, that
lap must be minimum of 150gsm.
- The table
below applies to multi-page reverse bound inserts where more than
one sheet forms the bind-in lap.
| 4pp |
Minimum:
80gsm |
Maximum:
150gsm |
| 8pp |
Minimum:
65gsm |
Maximum:
150gsm |
| 10pp |
Minimum:
60gsm |
Maximum:
130gsm |
| 12pp |
Minimum:
54gsm |
Maximum:
115gsm |
| 14pp |
Minimum:
54gsm |
Maximum:
115gsm |
| 16pp |
Minimum:
54gsm |
Maximum:
115gsm |
Hannanprint
Conditions
All inserts are subject to the approval of Hannanprint who reserves
the right to refuse any material considered unsuitable for publication.
Whilst every effort will be made to process inserts as ordered,
no liability can be accepted for misplacement or omission.
Hannanprint NSW will not guarantee the level or response associated
with an insert.
Advertising agents and advertisers accept responsibility for the
contents of their inserts and agree to indemnify Hannanprint NSW
against any claims or proceedings arising from publication of such
inserts.
|